Dry ice blasting is a special kind of blasting operation that involves the use of carbon dioxide gas in solid form. The gas is placed under pressure and low temperature in order to convert it to solid form. The cleaning process makes use of a combination of three main aspects. These aspects are sublimation, extreme temperature change, and kinetic energy. When in need of Dry Ice Blasting Pittsburgh should be visited.
The process in which solid carbon (IV) oxide gas changes to gaseous form directly without first turning to liquid is referred to as sublimation. This is a very important factor in this kind of cleaning operation since it makes sure that no waste residue is formed at the cleaning site due to the abrasive. Dry ice, which is solid carbon dioxide, is used in form of pellets.
People prefer using dry ice over other kinds of abrasives for several reasons. To begin with, dry ice is not toxic. This means that this abrasive does not cause any form of pollution to the environment. Since the material used in this form of cleaning does not cause pollution, it has been approved for usage by EPA in the US.
Another advantage associated with this kind of method is that dry ice is not an abrasive material. This implies that during the cleaning process, the dry ice does not cause damages to the surface. In addition, dry ice is a non-conductive material. All this qualities coupled together, means that there is no secondary waste produced and hence can make this method more costly.
The nature of this method allows it be used in cleaning equipment while the equipment is still in use. For this reason labor, time, and costs are reduced. The method also provides high efficiency which results to increased efficiency in industrial operations. Equipment and the system should be kept clean so as to reduce the frequency and severity of failure. By doing this, system down times is also reduced.
This method is usually associated with some changes in temperature of the target surface. Mostly, there is a drop in the temperature of the target surface. However, the drop in temperature is usually low and the body can always return to room temperature after only a few minutes. The surface area of the surface that is being cleaned and the amount of dry ice used per minute usually determine temperature change observed.
Some safety measures must be considered whenever one is using this method of blasting to perform surface cleaning. The pellets that are used for cleaning are normally propelled at a very high speed. For this reason, the pellets become dangerous to both humans and animals. Therefore, the gun used should never be pointed to a surface that is not being cleaned. Furthermore, one should never point the gun to a person or an animal.
There are several companies that offer this service. As such, one can easily find a service company to work with. Different companies charge differently and they offer services of different quality. As such, it is important to consider the experience of the company when making a choice.
The process in which solid carbon (IV) oxide gas changes to gaseous form directly without first turning to liquid is referred to as sublimation. This is a very important factor in this kind of cleaning operation since it makes sure that no waste residue is formed at the cleaning site due to the abrasive. Dry ice, which is solid carbon dioxide, is used in form of pellets.
People prefer using dry ice over other kinds of abrasives for several reasons. To begin with, dry ice is not toxic. This means that this abrasive does not cause any form of pollution to the environment. Since the material used in this form of cleaning does not cause pollution, it has been approved for usage by EPA in the US.
Another advantage associated with this kind of method is that dry ice is not an abrasive material. This implies that during the cleaning process, the dry ice does not cause damages to the surface. In addition, dry ice is a non-conductive material. All this qualities coupled together, means that there is no secondary waste produced and hence can make this method more costly.
The nature of this method allows it be used in cleaning equipment while the equipment is still in use. For this reason labor, time, and costs are reduced. The method also provides high efficiency which results to increased efficiency in industrial operations. Equipment and the system should be kept clean so as to reduce the frequency and severity of failure. By doing this, system down times is also reduced.
This method is usually associated with some changes in temperature of the target surface. Mostly, there is a drop in the temperature of the target surface. However, the drop in temperature is usually low and the body can always return to room temperature after only a few minutes. The surface area of the surface that is being cleaned and the amount of dry ice used per minute usually determine temperature change observed.
Some safety measures must be considered whenever one is using this method of blasting to perform surface cleaning. The pellets that are used for cleaning are normally propelled at a very high speed. For this reason, the pellets become dangerous to both humans and animals. Therefore, the gun used should never be pointed to a surface that is not being cleaned. Furthermore, one should never point the gun to a person or an animal.
There are several companies that offer this service. As such, one can easily find a service company to work with. Different companies charge differently and they offer services of different quality. As such, it is important to consider the experience of the company when making a choice.
About the Author:
You can find a list of the benefits and advantages of using professional dry ice blasting Pittsburgh services at http://www.asmenvironmental.com right now.
Няма коментари:
Публикуване на коментар