понеделник, 16 май 2016 г.

The Good And The Bad Of Data Center Flooring

By Ann Bell


A number of those important systems of computers are housed in these centers that have about enough machines, equipment, and others. In fact, components like telecommunications, storage, temperature components, power supplies, and even connections are included here. Fact is big centers take up about the same amount of energy of a small town which means electricity is a really important factor for this type of business.

Working in centers that may have numerous tasks to offer means that a lot of factors must be maintained like its floor system for example since that should be raised and improved. Of course, all of us need an office to stay which is comfortable, convenient, and efficient. We must also be aware that not all of which are beneficial since some are considered bad and this leads us in determining about the data center flooring and its pros and cons.

A good effect of this is how the refrigeration pipes and cold water can be stored or chilled properly. Common scenarios have the piping in being mounted on top of the ceiling and that is not safe if ever we talk about possible leakages to happen. Having the floors raised or improved places those pipes below instead which we can observe if leaks occur and it has a drainage system as well.

We shall receive that proper ventilation and air distribution in order to maintain coolness inside and that is another advantage for us. Close control unit with the association of air conditioner is also common in a setting of these centers. Units are discharged either up or down. In fact, those spots that we desire to have been cooled already are locked on already to receive that.

The ground grids play a vital role in this as well. That ground reference grid should be not far from the important materials or equipment where the improved floor has been located. Reference grid should therefore be installed below the surface.

There is a low voltage cabling which is significant for individuals due to its prevention against distortion of certain signals. That is strategically made to be of a small size because manufacturers do not want it to be blocking the flow of cold air. A good strategy would be to divide the power and data cabling from one another which has been what most centers have practiced.

Now let us discuss about some of its known disadvantages because there is no such thing that does not have that since not all things are advantageous. A concrete example is that when time continues further, we will find it difficult to make use of the various components inside the facility. What makes that complicated is that the things will surely multiply in the future. Always inspect during the installation to avoid that.

A limitation on the floor loading is also present. As previously discussed, things may multiply and more equipment will be housed in the improved surface. In other words, only a few components shall be housed and not all.

Emergency cases like earthquakes could be a problem for us because we shall not be able to notice that aspect. In other words, we cannot identify its seismic rating. That could turn into danger especially since our health is more important than whatever material is placed inside that company.




About the Author:



Няма коментари:

Публикуване на коментар